Furniture Care
Cast Aluminum
Cast Aluminum furniture is made by pouring molten metal into sand castings or precision machined molds to form component parts for chairs, tables or accessories. The frames are then welded and finished with a durable powder coating process. This finishing process for aluminum, iron and steel grinds a plastic coating into fine talc and is blown on to a chemically cleaned and etched surface of the metal. When baked, the talc melts and fuses into the metal producing a thick durable weather resistant coating which is substantially thicker than a normal spray paint process. The manufacturers represented at Casual Marketplace are widely recognized for their quality, elegance and sophisticated styles.
-
A spray nozzle and a garden hose is your best defense. Periodic cleaning of frames is recommended. Simply wash with mild soap and rinse thoroughly. Do not use any kind of wax, abrasive materials or strong detergents on textured finishes.
-
Touch-up paint to match your frame color is available at Casual Marketplace or from your manufacturer. Place the frame in an open area with plenty of ventilation – preferably outdoors. Using a very fine grit sand paper (120 grit or more) lightly sand the damaged area until smooth with the rest of the surface. Using a clean rag lightly dipped in rubbing alcohol or mineral spirits, wipe the sanded area clean of dirt and oil. This primes the affected area and provides the maximum bonding surface for the paint to adhere. Shake spray can for at least one minute. Holding the spray can 8 – 10 inches away from surface to be touched up, spray the damaged area lightly in an even left toright motion. This action helps to prevent paint runs. For best results, make two to three light coats allowing paint to dry in between coats. Read the information affixed to the spray can for additional information. Touch up applications should be limited to as small an area as necessary to repair the damage. Be sure to use the left to right motion when touching up to feather the area into the established finish area. Wait until paint is very dry before determining if an additional coat is needed.
Extruded Aluminum
Extruded Aluminum furniture is formed by forcing aluminum stock through dies. The result is a seamless extrusion of aluminum that comes in may shapes and forms. It can be bent into beautiful shapes and styles. The frames are then welded and finished with a durable powder coating process. This finishing process for aluminum, iron and steel grinds a plastic coating into fine talc and is blown on to a chemically cleaned and etched surface of the metal. When baked, the talc melts and fuses into the metal producing a thick durable weather resistant coating which is substantially thicker than a normal spray paint process. This state of the art process is warranted by manufacturers against peeling and flaking due to defective painting.
-
A spray nozzle and a garden hose is your best defense. Periodic cleaning of frames is recommended. Simply wash with mild soap and rinse thoroughly. Do not use any kind of wax, abrasive materials or strong detergents on textured finishes.
-
Touch-up paint to match your frame color is available at Casual Marketplace or from your manufacturer. Place the frame in an open area with plenty of ventilation – preferable outdoors. Using a very fine grit sand paper (120 grit or more) lightly sand the damaged area until smooth with the rest of the surface. Using a clean rag lightly dipped in rubbing alcohol or mineral spirits, wipe the sanded area clean of dirt and oil. This primes the affected area and provides the maximum bonding surface for the paint to adhere. Shake spray can for at least one minute. Holding the spray can 8 – 10 inches away from surface to be touched up, spray the damaged area lightly in an even left to right motion. This action helps to prevent paint runs. For best results, make two to three light coats allowing paint to dry in between coats. Read the information affixed to the spray can for additional information. Touch up applications should be limited to as small an area as necessary to repair the damage. Be sure to use the left to right motion when touching up to feather the area into the established finish area. Wait until paint is very dry before determining if an additional coat is needed. Small nicks – spray touch-up paint onto a flat plate or dish. Use a small artist’s brush to transfer the paint from the plate to the furniture. Texture can be enhanced with a clean dry brush after the paint becomes sticky.
Wrought Iron
Wrought Iron furniture is made from heavy gauge, low carbon rolled steel. State-of-the art paint systems are used by the manufacturers to provide strong, durable finishes. Wrought Iron offers traditional styling with a more formal look. Its light, airy designs add interest to any setting, furnishing an area without making a bold design statement. Iron furniture has a timeless elegance with enduring beauty.
We do not recommend purchasing Wrought Iron for use near chlorinated swimming areas or in shore locations. Airborne chlorine and salt accelerate the onset of rust and oxidization on these frames.
-
A spray nozzle and a garden hose is your best defense. Periodic cleaning of frames is recommended. Simply wash with mild soap and rinse thoroughly. Do not use any kind of wax, abrasive materials or strong detergents on textured finishes.
-
Touch-up paint to match your frame color is available at Casual Marketplace or from your manufacturer. Place the frame in an open area with plenty of ventilation – preferably outdoors. Using a very fine grit sand paper (120 grit or more) lightly sand the damaged area until smooth with the rest of the surface. Using a clean rag lightly dipped in rubbing alcohol or mineral spirits, wipe the sanded area clean of dirt and oil. This primes the affected area and provides the maximum bonding surface for the paint to adhere. Shake spray can for at least one minute. Holding the spray can 8 – 10 inches away from surface to be touched up, spray the damaged area lightly in an even left to right motion. This action helps to prevent paint runs. For best results, make two to three light coats allowing paint to dry in between coats. Read the information affixed to the spray can for additional information. Touch up applications should be limited to as small an area as necessary to repair the damage. Be sure to use the left to right motion when touching up to feather the area into the established finish area. Wait until paint is very dry before determining if an additional coat is needed.
Fabric
Outdoor fabrics are designed to endure years of sun, soil and moisture. But the life of your patio furniture fabric largely depends on its care and use. Suntan and sun block products may permanently discolor any fabric. As with any other stain, this possibility can be minimized by immediately cleaning after contact. Molds and mildews grow on dirt and impurities, so it is important to clean your fabrics regularly. In addition, storing your furniture, covering and protecting it from extreme elements will extend its life.
-
Occasionally washing off your sling fabrics with a garden hose and soft bristle brush is your best defense. Slings are designed to allow water and air to flow through for quick drying. Mix a solution of 3 parts warm water with 1 part mild detergent and 1/4 cup of bleach, apply with a soft brush and rinse thoroughly. Do not leave detergent residue in your fabrics or use solvent type cleaners which will cause the yarn to become brittle. To remove stubborn stains or mildew, one quarter cup of bleach can be mixed with the detergent. Spray on entire area and allow to soak in. If necessary, scrub vigorously with a sponge or soft bristle brush. Rinse thoroughly with clean water and air dry. IMPORTANT: Do not use bleach on printed fabrics.
-
Wash briskly with a sponge or soft brush using a solution of mild detergent and warm water. Rinse thoroughly with clean water. Allow to air dry. HINT: Cushions dry faster if they are allowed to stand on their side while drying.